v2110 default route

[Holger_Gmerek]

Hi,
i have a problem with a v2110 Hyper-v edition.
I have a IP of 192.168.1.1/24 on a B@C topoligy tha runs on esa1.
Registration and management on this topology is enabled.
APs are registering and the wlan service is running.
Now
the problem: I cant specify a "default Gateway" under the controller setting nor am i able to add a "default route" (0.0.0.0/0) via 192.168.1.254.
Everytime i try to add the entries i get an error message regarding non existant or illegal interface.
Controller is running 9.21 but the same under 9.15

[Doug]

No problem. Please let us know if you have any other questions, we are always glad to assist.

[Holger_Gmerek]

Ahh,
ok thank you Doug for the quick answer, i was shure i made a mistake somewhere.

[Doug]

Hello,

You can only configure the default route for physical ports not virtual.

[Doug]

If the admin port has not been reconfigured, you could attach to the controller directly with a PC - https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-login-to-the-management-port-of-the...

Delete the virtual interface, then add the information back in this time selecting Mode: Physical.