V2110 Login Management - RADIUS
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-07-2019 05:54 PM
I'm attempting to set up my V2110 EWC to authenticate users via RADIUS using a Microsoft NPS instance. I've confirmed that requests are hitting NPS and that the system is granting access but I EWC logs are showing that the requests are being rejected.
To be clear, this is for management of the appliance. We have 802.1x setup using NPS for our WLANs and this is working perfectly.
Not sure what to make of this issue since one end of the request is saying it's "good" but the controller logs show that the request is rejected. I've attempted all of the supported authentication types but there is no change.
To be clear, this is for management of the appliance. We have 802.1x setup using NPS for our WLANs and this is working perfectly.
Not sure what to make of this issue since one end of the request is saying it's "good" but the controller logs show that the request is rejected. I've attempted all of the supported authentication types but there is no change.
4 REPLIES 4
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-07-2019 06:21 PM
I modified it to Enterasys:version=1:mgmt=rw and it is now working.. As a test I also modified it to your suggestion and can confirm that works as well. I will leave it with that for now since it's working.
Thanks for the help!
Thanks for the help!
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-07-2019 06:18 PM
Just try... Filter-ID = Enterasys:mgmt=su
Doug Hyde
Director, Technical Support / Extreme Networks
Director, Technical Support / Extreme Networks
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-07-2019 06:16 PM
I'm returning Enterasys:version=1:mgmt=su
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-07-2019 06:15 PM
What filter-ID are you returning back to the controller? To speed this up you may want to speak with GTAC.
Doug Hyde
Director, Technical Support / Extreme Networks
Director, Technical Support / Extreme Networks