cancel
Showing results for 
Search instead for 
Did you mean: 

What algorithm is required in an Extreme Switch to connect an AP3825i with LACP enabled ?

What algorithm is required in an Extreme Switch to connect an AP3825i with LACP enabled ?

Jorge_Cota
New Contributor
Good day.

What algorithm should be used in an Extreme Switch to configure Link aggregation and be able to connect an AP3825i with the LACP option enabled?

This is the command that has been used:
Enable sharing 1 grouping 22,23 address-based algorithm L2 lacp

The ports have the same VLAN, speed and duplex settings.

It is having problems signing this model to EWC and would like to discard the LAG.

I hope you can support me.

Greetings.
10 REPLIES 10

faste
New Contributor II
I belive there is a bug in 10.31. I've been running that conf. For about 2 years now but after 10.31 it stopped working.

Sorry faste.

So with version 10.31 you have the same problem?

We are considering lowering the EWC to version 10.21.

thanks for the support.

Thanks for the support French, Luke.

In fact, it is the procedure that we are doing.

But by enabling the two ports on the Switch, which form a LAG, communication with the AP is lost.

faste
New Contributor II
I've been using versions from 9.15.* via 9.21.*, 10.21.* and now 10.31.02 which looks like a very good release apart from some quarks.
GTM-P2G8KFN