03-08-2021 12:17 PM
I have no idea what the firmware is. I have held the reset button for 30 seconds hoping its a misconfiguration and ive reset my poe switch as well yet it still does not come up.
I can console in but i dont know the default log in ive tried admin and areohive/areohive1
Any help would be amazing.
Solved! Go to Solution.
03-08-2021 04:33 PM
Hello, this guide reviews some steps you can take to troubleshoot an AP that isn’t connecting to XIQ on it’s own, and some commands to connect the device manually if you’d like to: https://extremeportal.force.com/ExtrArticleDetail?an=000057794&q=Capwap%20troubleshooting
The username for HiveOS devices is always “admin” without the quotations, and the default password will be either “aerohive” or “Aerohive1”.
You can also run the command “show version” to see what firmware version is running currently on the AP.
03-08-2021 04:33 PM
Hello, this guide reviews some steps you can take to troubleshoot an AP that isn’t connecting to XIQ on it’s own, and some commands to connect the device manually if you’d like to: https://extremeportal.force.com/ExtrArticleDetail?an=000057794&q=Capwap%20troubleshooting
The username for HiveOS devices is always “admin” without the quotations, and the default password will be either “aerohive” or “Aerohive1”.
You can also run the command “show version” to see what firmware version is running currently on the AP.