ā01-07-2021 06:47 PM
They asked me to place a Chromecast on the network that we have with Aerohive Classic, but when I try to connect it it just won't let me, do you know if it is necessary to enable any option in the Network Policy?
Solved! Go to Solution.
ā01-13-2021 05:48 AM
Take a look at the Traffic Filter for the Network Policy. If you are using the default traffic filter and havenāt made any changes to it, you shouldnāt need to do anything. But if you are using a different traffic filter, make sure the āEnable Inter-station Trafficā setting is set to true. If this is disabled, it wonāt allow wireless clients to communicate with each other.
Also, check to see if you have any IP Firewall Policies set that āDrop traffic between stationsā.
Lastly, are your clients and the Chromecast on the same VLAN? Because if they arenāt, you will need to look at your Bonjour Gateway setup and/or router setup to make sure that multicast is being forwarded.
2 weeks ago
Iāve run into similar Chromecast issues on managed networks beforeāsometimes itās a multicast or client isolation setting in the policy. While troubleshooting, Iāve found apps like youcine tv tend to be more flexible with device compatibility in these environments.
ā01-13-2021 05:48 AM
Take a look at the Traffic Filter for the Network Policy. If you are using the default traffic filter and havenāt made any changes to it, you shouldnāt need to do anything. But if you are using a different traffic filter, make sure the āEnable Inter-station Trafficā setting is set to true. If this is disabled, it wonāt allow wireless clients to communicate with each other.
Also, check to see if you have any IP Firewall Policies set that āDrop traffic between stationsā.
Lastly, are your clients and the Chromecast on the same VLAN? Because if they arenāt, you will need to look at your Bonjour Gateway setup and/or router setup to make sure that multicast is being forwarded.
ā01-11-2021 11:41 PM
Thank you Esa, an apology for the delay, I have a version I think much older 8.2r2, and the APs are AP230 and AP250 models.
ā01-10-2021 08:53 PM
AP and version?
I had problems with version 10.2.r3. 10.2.r2 working fine and 10.2.r4 works perfectly.