Hi All,As the subject line suggests I have a few APs that didn't get named in one of our sites. I can narrow down the IDF it's coming out and the port. There used to e a way to flash the LEDs on an AP. Does anyone remember how to do this? This would ...
Ciao Folks,I have 7 AP410c’s (10.3r2 firmware) in one building and I am having Roaming/Handoff Latency or an unacceptable degree of “Sticky WAP Syndrome” with my customer’s multiple iPhone 12’s (iOS 14).Not a problem with other devices. i.e. my iPhon...
Hi,I have to use two AP460C outdoor MAPs to connect to buildings together. The distance between the two APs is only 20m. I want to use the 5GHz for the Backhaul Link. I have disabled the 2,4GHz. The problem is, that the "Client, Child" AP don't conne...
My access point not broadcasting SSID. Under the wifi1 interface it shows 0 SSID.But when logged into CLI and given show ssid it shows all the wireless network.sh lldp neigIND(P)-FIN Gi1/0/3 90 B mgt0show version-----------------------...
Red light on AP, no longer reachable via Cloudiq nor ip. Enduser no wifi, no chance to reconnect.This happend after minor, elrp ( exos switch loop prevention ) controlled network loop event. 70 to 75% off the AP,s ( all AP305C 10.3.2.0 ) surviv...
