iPerf3 Throughput testing
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-01-2022 06:55 PM
Hi community, dear @Sam Pirok​
I am doing some testing with iPerf3 and i am surprised about the results I'm seeing.
If I test with Gigabit cabling, from Host to AP I get good results the other way around it looks less great (see Screenshots).
Whats the explanation for this beaviour? If i test AP to AP the results are simular low ~200 Mbps
Best regards,
Andi
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-11-2022 04:32 AM
There are many factors to wireless performance. Please review this article and see if it helps: https://extremeportal.force.com/ExtrArticleDetail?an=000079922
If you need more help we'd need to understand a lot more detail on your testing, including AP configuration, client capabilities etc.
-Gareth
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-12-2022 01:24 AM
Thanks for the link @Gareth Mitchell, I actually didn't want to test the performance over the air. Just the wired connection, i thought i may include some iPerf Wired testing for all APs to ensure they are all connected with proper Gigabit cabling. Let me collect some more data and come back to the Hub with my findings. Thanks for your support!
Cheer
Andi​
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-30-2022 02:03 PM
@Sam Pirok any idea why I would be seeing such low throughput on the 550,250,&230, but not on the 650? These are all Cat6a cabling patched into HP/Aruba gigabit switches.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-30-2022 05:30 PM
@w1f1n00b could we also get a couple packet captures from you, one from one of the slower APs and one from the 650 for comparison? If you could also send tech data for the same APs you use to get the packet captures, that would help as well.
Please feel free to send the data directly to me at community@extremenetworks.com. ​​
