Extreme Networks

zlinuxboy · ‎03-07-2021

I am engage in aerohive’s wlan solution. would like to apply them on our corp. I wouder how to troubleshooting hive, mesh , client roaming between APs. is that any tutorial to explain their principle and the different of cli command, such as

show amrp dnxp neighbor
show hive <string> neighor

etc.

SamPirok · ‎03-08-2021

Hello, this guide reviews some CLI commands to troubleshoot Mesh setups: https://extremeportal.force.com/ExtrArticleDetail?an=000056710&q=Troubleshooting%20Mesh%20HIveOS

This page has links to our CLI guides so you can find descriptions for any CLI command you want to run, depending on the HIveOS version and hardware model you’re working with: https://docs.aerohive.com/330000/docs/help/english/ng/Content/reference/docs/cli-reference-guides.ht...

View solution in original post

zlinuxboy · ‎03-10-2021

thanks @Sam Pirok

Lueilwitz · ‎03-10-2021

Thanks for the information, I will try to figure it out for more. Keep sharing such informative post keep suggesting such post.

SamPirok · ‎03-09-2021

This guide provides more information on how Mesh is set up: https://extremeportal.force.com/ExtrArticleDetail?an=000083778&q=Mesh%20set%20up%20XIQ

zlinuxboy · ‎03-09-2021

hmm， it’s not enough. Beside the cli guide, I also want to learn how hive/mesh works.

Extreme Networks

Is that any tutorial about hive, mesh and cli troubleshooting?

Is that any tutorial about hive, mesh and cli troubleshooting?