The CPU utilization of AP130 and AP250 is at 99%

[khs0015]

* firmware

AP 250 - 8.2.4.0

AP 130 - 6.5.7.0

Are there any known cases where a spike in network traffic or interference from nearby devices on the 2.4GHz channel causes excessive event log accumulation, leading to a significant increase in CPU utilization?

[khs0015]

Hello Christoph,

Thank you for your suggestions.

We have already performed a firmware update and rebooted the device.
We'll continue monitoring the system and will also check the points you mentioned.

Best regards,

[Christoph_S · Accepted solution]

Hello @khs0015,

• Check the processes 
• Check radio w0 for CRC errors, channel utilization %
• Check ascp neighbors for high number of interfering APs
• Check your network for broadcast or multicast traffic

BR,