cancel
Showing results for 
Search instead for 
Did you mean: 

AP510i-WR How to set for Ekahau Survey?

AP510i-WR How to set for Ekahau Survey?

PasqualeC
New Contributor
Hello

I need to know if it's possible to configure AP510I-WR as standalone AP mode to using for surveying with Ekahau.
We could place in the room without any network connection and measure with Ekahau the real RF emission in rooms for 2,4 and 5GHz.

Thanks
1 ACCEPTED SOLUTION

Mike_Lane
Extreme Employee
Easily done sir; just read this article from right here in the HUB.

The process is also documented in the Access Point System Reference Guide.

As far as your "AP on a stick" testing is concerned: Device/Radio settings are done exactly as they are in adopted, VC, or standalone modes.

   - Good Luck, Mike

View solution in original post

1 REPLY 1

Mike_Lane
Extreme Employee
Easily done sir; just read this article from right here in the HUB.

The process is also documented in the Access Point System Reference Guide.

As far as your "AP on a stick" testing is concerned: Device/Radio settings are done exactly as they are in adopted, VC, or standalone modes.

   - Good Luck, Mike

GTM-P2G8KFN