CLI Command to convert from HIVE OS to WiNG

[ARUN_SHARMA]

Hi,

Is there any command to change the personality of Universal AP from HiveOS to WiNG without on boarding to XIQ?? 

How to exit from service personnel mode if AP305C booted in to? As this AP required a special console cable that I currently didn't have. 

Regards,

ARUN

[RobertZ · Accepted solution]

Changing personality from HiveOS to WiNG is that it has to be done from within XIQ
How to switch Universal AP operational modes between HiveOS and WiNG

[JoshC2 · Accepted solution]

#_system boot-os WiNG

#reboot

[JoshC2 · Accepted solution]

#_system boot-os WiNG

#reboot

[Ssekazinga · Accepted solution]

Worked  - Simple and straight forward,

Thank you

[rmu]

hi

i only have the cli command for changing from 
wing to aerohive resp. identify to wing/aerohive

Wing > Aerohive
>enable
#operational-mode xiq-cloud force
>> AP boots into Aerohive OS automatically

Identify > Aerohive
- intermediate step to WiNG is needed
- then from WiNg to Aerohive

Identify > Wing
#cset personality distributed

[ARUN_SHARMA]

Hi Robert,

As per this we need to onboard the AP first to XIQ then only we can switch it to WiNG. I am asking for CLI command where I can directly switch from Cloud to WiNG without onboarding to XIQ from AP console, because onboarding is not possible where client has WiNG architecture.