Different power range on same rf-domain

[tcheurby]

Hello community,

I would like to know if it was possible to assign a different smart-rf policy for APs from the same site.

For example, I have a big high-school with amphitheaters with lots of connections and classrooms where the number of APs is very dense with a high propagation verticality between my floors but also an administrative part which is a classic office area.

I would like to create a kind of smart-rf microcell policy with reduced power for coverage of high density areas and another in normal power mode.
Problem the smart-rf-policy only applies for one rf-domain and all my APs are in the same rf-domain.

Is there a way to do that to help my smart-rf policy and reduce the channel overlapp?

Strangely enough the command area tells us that we can assign a list of Channel and power but in fact only a list of channels is definable... a pity it corresponded to my need.

Vx-9000-1(config-smart-rf-policy-test)#?
Smart RF Mode commands:
area Specify channel list/ power for an area


Vx-9000-1(config-smart-rf-policy-test)#area test ?
channel-list Select channel list for area

Thank you for your help 

[Daniel_Fraile_V]

You can group those by area or floor

code:

#smart-rf-policy yourSMART-RF
controllerconfig-smart-rf-policy-yourSMART-RF)#group-by
area   floor