cancel
Showing results for 
Search instead for 
Did you mean: 

mesh redundant links with WING 5.8.6

mesh redundant links with WING 5.8.6

Aviv_Kedem
Contributor
How i configure stp+mesh to form a mesh redundant links with wing 5.8.6 ?
I as seen in release notes of wing 5.8.6 is appears: "STP packets coming from a mesh port need to be forwarded to wired ports... and now is allowed by STP"

OR

Should I configure as port channel as alternative solution???

Thanks

5 REPLIES 5

Tuan_Nguyen1
New Contributor
Can I can use 1 device Wing 5.7 with 1 device Wing 5.8?

Aviv_Kedem
Contributor
Thank you 

Peter_Miller
Extreme Employee
for dual mesh links.. run stp on the Switches behind the Mesh APs... thats it.. no need to run on AP..
The AP will automatically pass BPDU over the Radio interface.

Aviv_Kedem
Contributor
Peter thank you for your reply,

Do You mean, to prevent loop i must to set up stp on the switch ports AND ge of the APS?

Please post please the recommended stp settings of the AP GE port for loop prevention to work properly (CLI of course).

Thanks.

GTM-P2G8KFN