Motorola AP 6532 migration to
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-17-2019 01:41 PM
i have a customer who has 11 AP's on 5.9.1.5-001R for all AP 6532s . they need to add two AP''s, so we are planning on migratding to the 7522. is there a migration tool or migration path. Customer is worried about recreating the whole configuration.
1 REPLY 1
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-17-2019 02:02 PM
Hello Chris,
There is no migration tool that will allow such a thing. I would recommend the following:
1 - Configure the AP6532 APs to use the ANYAP profile and not the default AP6532 profile
2 - Make a copy of the config
3 - Change the MAC address of the AP6532 to reflect that of the AP7522 AP. If you need to change IP address as well go ahead and do so.
4 - Load the config file into the AP7522 (don't save), reboot and test.
Thank you,
Chris
There is no migration tool that will allow such a thing. I would recommend the following:
1 - Configure the AP6532 APs to use the ANYAP profile and not the default AP6532 profile
2 - Make a copy of the config
3 - Change the MAC address of the AP6532 to reflect that of the AP7522 AP. If you need to change IP address as well go ahead and do so.
4 - Load the config file into the AP7522 (don't save), reboot and test.
Thank you,
Chris
Christoph S.
