NX5500 VLAN's DHCP Configuration

[Wualter]

code:

Hello good morning, I hope you are well, I have a series of doubts regarding the following case:

* I have an NX5500 with several AP7532 adopted.

* I have 3 SSIDs each with a different VLAN 116,117 and 118, to which I want to assign a DHCP server with another range of IP's to each one from the NX5500.

* Each of these SSIDs should be associated with the internal VLANs of the company (16,17 and 18), that is, 116 exit through the gateway of VLAN 16, 117 through the gateway of VLAN 17 and so on .

* I have 4 VLANs created in the NX5500 Profile, VLAN1 (Native), 116, 117, 118.

* The GE1 port is configured as Trunk and allows the passage of all those VLANs

* The ports on the Switch are configured to pass VLANs 1,16,17,18

What I want is for each SSID to go online and then apply the respective ACLs.

If you can help me with this I would really appreciate it ..

Regards...

Then the current running-config show:

!
! Configuration of NX5500 version 5.9.4.0-020R
!
!
version 2.6
!
!
client-identity-group default
 load default-fingerprints
!
ip access-list BROADCAST-MULTICAST-CONTROL
 permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"
 permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit DHCP replies"
 deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-description "deny windows netbios"
 deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"
 deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP local broadcast"
 permit ip any any rule-precedence 100 rule-description "permit all IP traffic"
!
mac access-list PERMIT-ARP-AND-IPv4
 permit any any type ip rule-precedence 10 rule-description "permit all IPv4 traffic"
 permit any any type arp rule-precedence 20 rule-description "permit all ARP traffic"
!
ip snmp-access-list default
 permit any
!
firewall-policy default
 no ip dos tcp-sequence-past-window
!
!
mint-policy global-default
!
meshpoint-qos-policy default
!
wlan-qos-policy default
 qos trust dscp
 qos trust wmm
!
radio-qos-policy default
!
wlan RH-CAP-RF-CD
 ssid RH-CAP-RF-CD
 vlan 116
 bridging-mode local
 encryption-type ccmp
 authentication-type none
 wpa-wpa2 psk 0 Al3rc3-4nd1n0
!
wlan RH-USERS-CD
 ssid RH-USERS-CD
 vlan 117
 bridging-mode local
 encryption-type ccmp
 authentication-type none
 wpa-wpa2 psk 0 P4lm4-Ch1l3n4
!
wlan RH-VISITAS-CD
 ssid RH-VISITAS-CD
 vlan 118
 bridging-mode local
 encryption-type ccmp
 authentication-type none
 wpa-wpa2 psk 0 Rio-Aconcagua-5295
!
wlan prueba
 ssid pruebas
 vlan 1
 bridging-mode local
 encryption-type ccmp
 authentication-type none
 wpa-wpa2 psk 0 pruebatds
!
dhcp-server-policy DHCP-VLAN16
 option IPVLAN16 16 ascii
 dhcp-pool VLAN16
  network 10.45.90.0/24
  address range 10.45.90.2 10.45.90.254
  default-router 10.45.90.1
!
!
management-policy default
 no telnet
 no http server
 https server
 rest-server
 ssh
 user admin password 1 82d01196dd1106ce85399528e108e727af41390478b86320fc4dd62f7df28306 role superuser access all
 snmp-server community 0 private rw
 snmp-server community 0 public ro
 snmp-server user snmptrap v3 encrypted des auth md5 0 admin123
 snmp-server user snmpmanager v3 encrypted des auth md5 0 admin123
!
ex3500-management-policy default
 snmp-server community public ro
 snmp-server community private rw
 snmp-server notify-filter 1 remote 127.0.0.1
 snmp-server view defaultview 1 included
!
ex3500-qos-class-map-policy default
!
ex3500-qos-policy-map default
!
profile nx5500 default-nx5500
 no autoinstall configuration
 no autoinstall firmware
 no device-upgrade auto
 crypto ikev1 policy ikev1-default
  isakmp-proposal default encryption aes-256 group 2 hash sha
 crypto ikev2 policy ikev2-default
  isakmp-proposal default encryption aes-256 group 2 hash sha
 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
 crypto ikev1 remote-vpn
 crypto ikev2 remote-vpn
 crypto auto-ipsec-secure
 crypto load-management
 crypto remote-vpn-client
 interface ge1
 interface ge2
 interface ge3
 interface ge4
 interface ge5
 interface ge6
 interface vlan1
  ip address 10.21.1.90/24
  ip address zeroconf secondary
 interface vlan116
  ip address 10.45.90.1/24
 interface vlan117
  ip address 10.45.91.1/24
 interface vlan118
  ip address 10.45.92.1/24
 interface pppoe1
 use dhcp-server-policy DHCP-VLAN16
 use firewall-policy default
 service pm sys-restart
 router ospf
 router bgp
 adoption-mode controller

.....

!
profile ap7532 default-ap7532
 autoinstall configuration
 autoinstall firmware
 no device-upgrade auto
 crypto ikev1 policy ikev1-default
  isakmp-proposal default encryption aes-256 group 2 hash sha
 crypto ikev2 policy ikev2-default
  isakmp-proposal default encryption aes-256 group 2 hash sha
 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
 crypto ikev1 remote-vpn
 crypto ikev2 remote-vpn
 crypto auto-ipsec-secure
 crypto load-management
 crypto remote-vpn-client
 interface radio1
  wlan RH-CAP-RF-CD bss 1 primary
  wlan RH-USERS-CD bss 2 primary
  wlan RH-VISITAS-CD bss 3 primary
  wlan prueba bss 4 primary
 interface radio2
 interface ge1
  switchport mode trunk
  switchport trunk allowed vlan 1,16-18
 interface vlan1
  ip address zeroconf secondary
  ip dhcp client request options all
 interface pppoe1
 use firewall-policy default
 use client-identity-group default
 service pm sys-restart
 router ospf
 adoption-mode controller
!
rf-domain default
 country-code cl
!
nx5500 40-83-DE-86-63-08
 use profile default-nx5500
 use rf-domain default
 hostname nx5500-866308
 license AAP 6e8043c0fdffcc38f75bb6272286f139292caac02c5641f70ed992a2258fc17e12360918255142fd
 license ADSEC DEFAULT-ADV-SEC-LICENSE
 no device-upgrade auto
 interface vlan1
  ip address 10.21.1.90/24
  ip address zeroconf secondary
 use dhcp-server-policy DHCP-VLAN16
 logging on
 logging console warnings
 logging buffered warnings
 controller adopted-devices aps
!
ap7532 94-9B-2C-28-FA-60
 use profile default-ap7532
 use rf-domain default
 hostname RP-01-07
 area "Rack Picking"
 floor "Piso 1"
!
ap7532 94-9B-2C-28-FB-90
 use profile default-ap7532
 use rf-domain default
 hostname RP-01-06
 area "Rack Picking"
 floor "Piso 1"
!
ap7532 94-9B-2C-28-FF-44
 use profile default-ap7532
 use rf-domain default
 hostname EX-03
!
ap7532 94-9B-2C-28-FF-48
 use profile default-ap7532
 use rf-domain default
 hostname ap7532-28FF48

!
!
end

.