Only 1 AP Showing Per RF-Domain

[RMarshall]

Hi,

I've recently set up a VX9000, and adopted a number of AP7522 access points that were previous adopted by a support company's VX9000. We have 3 RF-Domains, the first is where the controller resides, the second is where the APs of the same site reside, different IP range; the third RF-Domain is for APs on a nearby site.

My problem is that only 1 AP appears per RF-Domain in the "Clients" sections on the VX9000 ("Clients" and "Statistics>Clients"), even when multiple APs per site have been adopted.

Also, the RF-Domain manager on those sites appears to flip between different APs, I don't know if that is related problem.

Thanks.

[RMarshall]

Hi,

Thanks for replying.

rf-domain rfd1
geo-coordinates ???
timezone ???
country-code ???
ad-wips-wireless-mitigation disable
ad-wips-wired-mitigation disable
!
rf-domain rfd2
geo-coordinates ???
timezone ???
country-code ???
ad-wips-wireless-mitigation disable
ad-wips-wired-mitigation disable
!
rf-domain rfd3
geo-coordinates ???
timezone ???
country-code ???
use smart-rf-policy default
ad-wips-wireless-mitigation disable
ad-wips-wired-mitigation disable

The RF-Domains rfd1 and rfd2 are within the same building, the VX9000 in the former, the APs in the latter; rfd3 is another site albeit 500m away. We are using MiNT L2 for AP adoptions for both rfd2 and rfd3.

Thanks.

[Fritz_Burnell]

Check to make sure you have the control-vlan set for the RF-Domains with APs.