problem with changing the password after updating

[error404]

hello, I have a problem after updating the vx9000 controller to version 5.9.2.2. After changing the password to the wifi network, no change is sent to ap.
someone may have the same problem and knows the solution ???

[RobertZ]

Yes if APs are not upgraded to same firmware as the WLC they will not fully adopt.

[error404]

@Ronald Dvorak yes i did commit/save the changes.
after a deeper diagnosis, it turns out that the controller does not transfer any changes to AP

[RobertZ]

To make sure that VX9000 has the firmware to upgrade the APs check with CLI command : 'show device-upgrade versions'.

If the VX has the firmware for your APs you can push the upgrade with command:

device-upgrade all < option>

force Force upgrade on all devices
no-reboot No reboot (manually reboot after the upgrade)
reboot-time Schedule a reboot time
staggered-reboot Reboot one at a time without network being hit
upgrade-time Schedule an upgrade time

[error404]

how soft the best to vx9000 and ap 6521,7522,7532

[RobertZ]

Not sure i understand what you are asking?


Note that for AP6521 Last Released firmware was WiNG 5.9.1