Report - Select Shutdown On or Off?

[Richard_Augusto]

Hello!!

See this scenary:

-----------------------------------------------------------------------------------------------
!###      show smart-rf select-shutdown on  "RF-CIDADE-NOVA"
--------------------------------------------------------------------------------
                  RADIO                          RADIO-MAC            STATE     
--------------------------------------------------------------------------------
  AP-CIDADE-NOVA-04-CAIXAS:R1              B8-50-01-7D-E3-50        On          
  AP-CIDADE-NOVA-01-VITRINE:R1             B8-50-01-50-4B-80        On          
  AP-CIDADE-NOVA-07-SAC:R1                 B8-50-01-4F-5F-C0        On          
  AP-CIDADE-NOVA-12-ALMOX-FRENTE:R1        94-9B-2C-08-DE-C0        On          
  AP-CIDADE-NOVA-02-LAVADORAS:R1           B8-50-01-7E-E3-00        On          
  AP-CIDADE-NOVA-03-PNEUS:R1               B8-50-01-7D-E4-00        On          
  AP-CIDADE-NOVA-10-BERCOS:R1              B8-50-01-7E-00-F0        On          
  AP-CIDADE-NOVA-05-AUTOSSERVICO:R1        B8-50-01-50-5B-50        On          
  AP-CIDADE-NOVA-06-BRINQUEDOS:R1          94-9B-2C-08-D0-80        On          
  AP-CIDADE-NOVA-13-ALMOX-FUNDO:R1         94-9B-2C-08-DC-80        On          
  AP-CIDADE-NOVA-08-MESAS:R1               B8-50-01-7D-E5-D0        On          
  AP-CIDADE-NOVA-09-LOTERIA:R1             B8-50-01-7D-E6-90        On          
--------------------------------------------------------------------------------

smart-rf-policy SMART-SHOP-CIDADE-NOVA
 assignable-power 5GHz max 15
 assignable-power 5GHz min 12
 assignable-power 2.4GHz max 14
 assignable-power 2.4GHz min 9
 channel-list 5GHz 36,40,44,48,149,153,157,165
 channel-width 5GHz 20MHz
 no select-shutdown

Question:

Why state select shutdown are on when smart rf policy is “no” ?

WiNG Version : 5.9.3.3 and 5.9.6.0
 

[ckelly]

Richard,

The select-shutdown feature is intended for High-density deployment designs focused on 5GHz coverage with the objective of identifying redundant 2.4GHz radios and disabling them, thus reducing the overall CCI (Co-Channel Interference ).

In your configuration:

mart-rf-policy SMART-SHOP-CIDADE-NOVA
 assignable-power 5GHz max 15
 assignable-power 5GHz min 12
 assignable-power 2.4GHz max 14
 assignable-power 2.4GHz min 9
 channel-list 5GHz 36,40,44,48,149,153,157,165
 channel-width 5GHz 20MHz
 no select-shutdown

The “no select-shutdown” entry means that you are NOT using the select-shutdown function.  In this case, all 2.4GHz radios (radio-1) will be operational all the time.

The “On” STATE for each of those APs means that radio-1 (2.4GHz) is currently *on*.  This is expected and correct if the select shutdown feature is disabled (which is the case for you.  “no select-shutdown”)