The entries in the ip snmp-access-list specify (if using 'permit' entries) which host or networks are allowed for SNMP traffic with an AP.In this case, your workstation address needs to exist either as a specific host entry in this list OR the networ...
So as expected, the 7532 port 161 shows as OPEN.Also, your workstation address (172.19.0.97) is not an address that would be allowed by SNMP based on the 621's ip snmp-listAre there any APs responding to snmp (that use the same exact snmp-access-list...
Okay, so nmap is showing that port 161 is closed, that explains the general failure. Just need to understand WHY that port is down. If you want to confirm that this nmap info is correct, run the same scan against one of the working 7532's. The STATE ...
Unfortunately, I cannot help with providing firmware images.The only other thing I can think of is to look at a copy of your complete running config from one of the AP621's. There might possibly be something in the config that is causing this.Or...ca...
You will need to run the AP in WiNG mode if you plan on using the CLI for management and want to truly manage in standalone mode. To do this though, you will need to first onboard the AP onto ExtremeCloud IQ (You can create a free personal account to...