This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Extreme Networks
- Community List
- Wireless
- ExtremeWireless (WiNG)
- RFS4000 adopts AP7562 and unadopts it instantly
Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
RFS4000 adopts AP7562 and unadopts it instantly
RFS4000 adopts AP7562 and unadopts it instantly
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
08-26-2019 12:09 AM
Hello guys!
Can you help me with this question?
Im running RFS4000 and adopt 1 AP7562 as Root directly connected to RFS. When I try to adopt another AP via Mesh network, I see it adopted for 1 second and then it unadopts back. It happens continiously. AP doesn't even upload config from RFS. First AP works as usual.
Thank you!
Can you help me with this question?
Im running RFS4000 and adopt 1 AP7562 as Root directly connected to RFS. When I try to adopt another AP via Mesh network, I see it adopted for 1 second and then it unadopts back. It happens continiously. AP doesn't even upload config from RFS. First AP works as usual.
Thank you!
17 REPLIES 17
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
08-26-2019 09:02 PM
Roman,
"If AP fails to detect controller on its port, it became non-root?"
There is a way to create a single AP Profile that will automatically switch a node from a root to non-root and vice-versa, but I'm trying to keep things simple here just to get the mesh connection to work.
Run these commands on both the root and non-root AP and paste the results: (Indicate which AP you are designating as the root node)
#show wireless meshpoint
#show wireless meshpoint config
#sh wireless meshpoint neighbor statistics rf
"If AP fails to detect controller on its port, it became non-root?"
There is a way to create a single AP Profile that will automatically switch a node from a root to non-root and vice-versa, but I'm trying to keep things simple here just to get the mesh connection to work.
Run these commands on both the root and non-root AP and paste the results: (Indicate which AP you are designating as the root node)
#show wireless meshpoint
#show wireless meshpoint config
#sh wireless meshpoint neighbor statistics rf
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
08-26-2019 08:46 PM
Chris,
thank you for your answer!
Im assign new profile with no-root settings In RFS and changing settings on AP - nothing happened, mint link still active, but no adoption yet. If AP fails to detect controller on its port, it became non-root?
thank you for your answer!
Im assign new profile with no-root settings In RFS and changing settings on AP - nothing happened, mint link still active, but no adoption yet. If AP fails to detect controller on its port, it became non-root?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
08-26-2019 03:33 PM
Roman,
The issue appears to come from that you copied the full config from the existing root node.
The WMM non-root node will not be connected via the wired connection and thus the meshpoint-device configuration in the non-root AP's main Profile needs to be setup to indicate that.
Current, it looks like this:
meshpoint-device ShougangMine
root <--This is what needs to change on the *non-root* node APs
monitor critical-resource action no-root
monitor primary-port-link action no-root
path-method uniform
hysteresis period 60
exclude wired-peer mint-level-1
acs priority-meshpoint 5GHz ShougangMine
acs priority-meshpoint 2.4GHz ShougangMine
Change that entry to "no root". commit write. Then try again.
Mesh APs that are setup as root nodes only accept mesh connections from other non-root nodes. They don't form mesh connections with other root nodes.
So what's happening here is that the AP is acting as a root node and therefore won't form a mesh connection with your first root node AP.
The issue appears to come from that you copied the full config from the existing root node.
The WMM non-root node will not be connected via the wired connection and thus the meshpoint-device configuration in the non-root AP's main Profile needs to be setup to indicate that.
Current, it looks like this:
meshpoint-device ShougangMine
root <--This is what needs to change on the *non-root* node APs
monitor critical-resource action no-root
monitor primary-port-link action no-root
path-method uniform
hysteresis period 60
exclude wired-peer mint-level-1
acs priority-meshpoint 5GHz ShougangMine
acs priority-meshpoint 2.4GHz ShougangMine
Change that entry to "no root". commit write. Then try again.
Mesh APs that are setup as root nodes only accept mesh connections from other non-root nodes. They don't form mesh connections with other root nodes.
So what's happening here is that the AP is acting as a root node and therefore won't form a mesh connection with your first root node AP.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
08-26-2019 03:25 PM
No, I made no changes, AP adopted and unadopted by itself.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
08-26-2019 02:57 PM
config of AP
!
! Configuration of AP7562 version 5.9.2.5-001R
!
!
version 2.6
!
!
client-identity-group default
load default-fingerprints
!
ip access-list BROADCAST-MULTICAST-CONTROL
permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"
permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit DHCP replies"
deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-description "deny windows netbios"
disable deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"
deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP local broadcast"
permit ip any any rule-precedence 100 rule-description "permit all IP traffic"
!
mac access-list PERMIT-ARP-AND-IPv4
permit any any type ip rule-precedence 10 rule-description "permit all IPv4 traffic"
permit any any type arp rule-precedence 20 rule-description "permit all ARP traffic"
!
ip snmp-access-list default
permit any
!
wlan ShougangWiFi
ssid ShougangWiFi
vlan 50
bridging-mode local
encryption-type ccmp
authentication-type none
no answer-broadcast-probes
wireless-client inactivity-timeout 600
wpa-wpa2 psk 0 Shoug@ngWiFi20!9
no wing-extensions wing-load-information
no client-load-balancing allow-single-band-clients 5ghz
no client-load-balancing allow-single-band-clients 2.4ghz
ip arp trust
shutdown on-unadoption
!
!
firewall-policy default
no ip dos smurf
no ip dos twinge
no ip dos invalid-protocol
no ip dos router-advt
no ip dos router-solicit
no ip dos option-route
no ip dos ascend
no ip dos chargen
no ip dos fraggle
no ip dos snork
no ip dos ftp-bounce
no ip dos tcp-intercept
no ip dos broadcast-multicast-icmp
no ip dos land
no ip dos tcp-xmas-scan
no ip dos tcp-null-scan
no ip dos winnuke
no ip dos tcp-fin-scan
no ip dos udp-short-hdr
no ip dos tcp-post-syn
no ip dos tcphdrfrag
no ip dos ip-ttl-zero
no ip dos ipspoof
no ip dos tcp-bad-sequence
no ip dos tcp-sequence-past-window
no ip-mac conflict
no ip-mac routing conflict
dhcp-offer-convert
no stateful-packet-inspection-l2
no virtual-defragmentation
!
!
mint-policy global-default
mtu 1460
!
meshpoint-qos-policy default
accelerated-multicast autodetect classification trust
!
radio-qos-policy default
!
meshpoint ShougangMine
description MeshConnex_Network
meshid ShougangMine
beacon-format mesh-point
control-vlan 40
allowed-vlans 40,50
neighbor inactivity-timeout 60
security-mode none
no root
!
smart-rf-policy SmartRF
sensitivity high
assignable-power 5GHz max 20
assignable-power 5GHz min 20
assignable-power 2.4GHz max 20
assignable-power 2.4GHz min 10
channel-list 5GHz 136
channel-width 5GHz auto
smart-ocs-monitoring frequency 5GHz 3
smart-ocs-monitoring frequency 2.4GHz 3
smart-ocs-monitoring sample-count 5GHz 3
smart-ocs-monitoring sample-count 2.4GHz 3
smart-ocs-monitoring extended-scan-frequency 5GHz 0
smart-ocs-monitoring extended-scan-frequency 2.4GHz 0
interference-recovery client-threshold 255
interference-recovery channel-switch-delta 5GHz 5
interference-recovery channel-switch-delta 2.4GHz 5
select-shutdown
neighbor-recovery power-threshold 5GHz -65
neighbor-recovery power-threshold 2.4GHz -65
select-shutdown cci-high-threshold -82
select-shutdown cci-low-threshold -95
select-shutdown frequency-limiter 5
select-shutdown frequency 30
coverage-hole-recovery interval 5GHz 15
coverage-hole-recovery interval 2.4GHz 15
coverage-hole-recovery coverage-interval 5GHz 5
coverage-hole-recovery coverage-interval 2.4GHz 5
interference-recovery channel-hold-time 180
!
!
management-policy default
no telnet
no http server
https server
rest-server
no ftp
ssh
user admin password 1 30edda66b744603adcdcebcf392eeff35f4b4f975891a2b413e579b84a6d3261 role superuser access all
no snmp-server manager v3
snmp-server community 0 private rw
snmp-server community 0 public ro
snmp-server user snmptrap v3 encrypted des auth md5 0 motorola
snmp-server user snmpmanager v3 encrypted des auth md5 0 motorola
!
profile ap7562 AP7562-Root
no mint mlcp ipv6
ip igmp snooping querier query-interval 2
bridge vlan 40
bridging-mode local
ip igmp snooping
ip igmp snooping querier
ipv6 mld snooping
ipv6 mld snooping querier
area ShougangMine
autoinstall configuration
no autoinstall firmware
device-upgrade count 5
crypto ikev1 policy ikev1-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ikev2 policy ikev2-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
crypto ikev1 remote-vpn
crypto ikev2 remote-vpn
crypto auto-ipsec-secure
crypto remote-vpn-client
interface radio1
channel 13
rate-selection opportunistic
placement outdoor
rts-threshold 1
wlan ShougangWiFi bss 2 primary
meshpoint ShougangMine bss 1
non-unicast tx-rate lowest-basic
antenna-mode 3x3
no dynamic-chain-selection
antenna-diversity
antenna-downtilt
interface radio2
channel 136
rate-selection opportunistic
placement outdoor
rts-threshold 1
meshpoint ShougangMine bss 1
antenna-mode 3x3
no dynamic-chain-selection
interface radio3
shutdown
placement outdoor
interface ge1
switchport mode trunk
switchport trunk native vlan 1
no switchport trunk native tagged
switchport trunk allowed vlan 1,40,50
use ip-access-list in BROADCAST-MULTICAST-CONTROL
ip arp trust
interface ge2
switchport mode access
switchport access vlan 40
use ip-access-list in BROADCAST-MULTICAST-CONTROL
ip arp trust
interface vlan1
ip address zeroconf
interface vlan40
ip address dhcp
ip dhcp client request options all
interface wwan1
interface pppoe1
use event-system-policy SNMP
use firewall-policy default
ntp server 10.10.1.6
no events on
logging forward critical
controller hello-interval 60 adjacency-hold-time 180
no cdp run
no lldp run
misconfiguration-recovery-time 0
critical-resource monitor interval 120
critical-resource CRM monitor direct all sync-adoptees 169.254.254.254 169.254.70.92 arp-only vlan 1 port ge1
critical-resource retry-count 5
service pm sys-restart
meshpoint-device ShougangMine
root
monitor critical-resource action no-root
monitor primary-port-link action no-root
path-method uniform
hysteresis period 60
exclude wired-peer mint-level-1
acs priority-meshpoint 5GHz ShougangMine
acs priority-meshpoint 2.4GHz ShougangMine
!
rf-domain ShougangMine
location Marcona
country-code ru
use smart-rf-policy SmartRF
channel-list dynamic
channel-list 5GHz 136
channel-list 2.4GHz 13
override-wlan CosapiWiFI ssid CosapiWiFi
controller-managed
!
rf-domain default
no country-code
!
ap7562 94-9B-2C-2A-BA-64
use profile AP7562-Root
use rf-domain ShougangMine
hostname VMM1-2ABA64
adoption-site ShougangMine
!
!
end
Yes, I have console access to AP's
!
! Configuration of AP7562 version 5.9.2.5-001R
!
!
version 2.6
!
!
client-identity-group default
load default-fingerprints
!
ip access-list BROADCAST-MULTICAST-CONTROL
permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"
permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit DHCP replies"
deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-description "deny windows netbios"
disable deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"
deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP local broadcast"
permit ip any any rule-precedence 100 rule-description "permit all IP traffic"
!
mac access-list PERMIT-ARP-AND-IPv4
permit any any type ip rule-precedence 10 rule-description "permit all IPv4 traffic"
permit any any type arp rule-precedence 20 rule-description "permit all ARP traffic"
!
ip snmp-access-list default
permit any
!
wlan ShougangWiFi
ssid ShougangWiFi
vlan 50
bridging-mode local
encryption-type ccmp
authentication-type none
no answer-broadcast-probes
wireless-client inactivity-timeout 600
wpa-wpa2 psk 0 Shoug@ngWiFi20!9
no wing-extensions wing-load-information
no client-load-balancing allow-single-band-clients 5ghz
no client-load-balancing allow-single-band-clients 2.4ghz
ip arp trust
shutdown on-unadoption
!
!
firewall-policy default
no ip dos smurf
no ip dos twinge
no ip dos invalid-protocol
no ip dos router-advt
no ip dos router-solicit
no ip dos option-route
no ip dos ascend
no ip dos chargen
no ip dos fraggle
no ip dos snork
no ip dos ftp-bounce
no ip dos tcp-intercept
no ip dos broadcast-multicast-icmp
no ip dos land
no ip dos tcp-xmas-scan
no ip dos tcp-null-scan
no ip dos winnuke
no ip dos tcp-fin-scan
no ip dos udp-short-hdr
no ip dos tcp-post-syn
no ip dos tcphdrfrag
no ip dos ip-ttl-zero
no ip dos ipspoof
no ip dos tcp-bad-sequence
no ip dos tcp-sequence-past-window
no ip-mac conflict
no ip-mac routing conflict
dhcp-offer-convert
no stateful-packet-inspection-l2
no virtual-defragmentation
!
!
mint-policy global-default
mtu 1460
!
meshpoint-qos-policy default
accelerated-multicast autodetect classification trust
!
radio-qos-policy default
!
meshpoint ShougangMine
description MeshConnex_Network
meshid ShougangMine
beacon-format mesh-point
control-vlan 40
allowed-vlans 40,50
neighbor inactivity-timeout 60
security-mode none
no root
!
smart-rf-policy SmartRF
sensitivity high
assignable-power 5GHz max 20
assignable-power 5GHz min 20
assignable-power 2.4GHz max 20
assignable-power 2.4GHz min 10
channel-list 5GHz 136
channel-width 5GHz auto
smart-ocs-monitoring frequency 5GHz 3
smart-ocs-monitoring frequency 2.4GHz 3
smart-ocs-monitoring sample-count 5GHz 3
smart-ocs-monitoring sample-count 2.4GHz 3
smart-ocs-monitoring extended-scan-frequency 5GHz 0
smart-ocs-monitoring extended-scan-frequency 2.4GHz 0
interference-recovery client-threshold 255
interference-recovery channel-switch-delta 5GHz 5
interference-recovery channel-switch-delta 2.4GHz 5
select-shutdown
neighbor-recovery power-threshold 5GHz -65
neighbor-recovery power-threshold 2.4GHz -65
select-shutdown cci-high-threshold -82
select-shutdown cci-low-threshold -95
select-shutdown frequency-limiter 5
select-shutdown frequency 30
coverage-hole-recovery interval 5GHz 15
coverage-hole-recovery interval 2.4GHz 15
coverage-hole-recovery coverage-interval 5GHz 5
coverage-hole-recovery coverage-interval 2.4GHz 5
interference-recovery channel-hold-time 180
!
!
management-policy default
no telnet
no http server
https server
rest-server
no ftp
ssh
user admin password 1 30edda66b744603adcdcebcf392eeff35f4b4f975891a2b413e579b84a6d3261 role superuser access all
no snmp-server manager v3
snmp-server community 0 private rw
snmp-server community 0 public ro
snmp-server user snmptrap v3 encrypted des auth md5 0 motorola
snmp-server user snmpmanager v3 encrypted des auth md5 0 motorola
!
profile ap7562 AP7562-Root
no mint mlcp ipv6
ip igmp snooping querier query-interval 2
bridge vlan 40
bridging-mode local
ip igmp snooping
ip igmp snooping querier
ipv6 mld snooping
ipv6 mld snooping querier
area ShougangMine
autoinstall configuration
no autoinstall firmware
device-upgrade count 5
crypto ikev1 policy ikev1-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ikev2 policy ikev2-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
crypto ikev1 remote-vpn
crypto ikev2 remote-vpn
crypto auto-ipsec-secure
crypto remote-vpn-client
interface radio1
channel 13
rate-selection opportunistic
placement outdoor
rts-threshold 1
wlan ShougangWiFi bss 2 primary
meshpoint ShougangMine bss 1
non-unicast tx-rate lowest-basic
antenna-mode 3x3
no dynamic-chain-selection
antenna-diversity
antenna-downtilt
interface radio2
channel 136
rate-selection opportunistic
placement outdoor
rts-threshold 1
meshpoint ShougangMine bss 1
antenna-mode 3x3
no dynamic-chain-selection
interface radio3
shutdown
placement outdoor
interface ge1
switchport mode trunk
switchport trunk native vlan 1
no switchport trunk native tagged
switchport trunk allowed vlan 1,40,50
use ip-access-list in BROADCAST-MULTICAST-CONTROL
ip arp trust
interface ge2
switchport mode access
switchport access vlan 40
use ip-access-list in BROADCAST-MULTICAST-CONTROL
ip arp trust
interface vlan1
ip address zeroconf
interface vlan40
ip address dhcp
ip dhcp client request options all
interface wwan1
interface pppoe1
use event-system-policy SNMP
use firewall-policy default
ntp server 10.10.1.6
no events on
logging forward critical
controller hello-interval 60 adjacency-hold-time 180
no cdp run
no lldp run
misconfiguration-recovery-time 0
critical-resource monitor interval 120
critical-resource CRM monitor direct all sync-adoptees 169.254.254.254 169.254.70.92 arp-only vlan 1 port ge1
critical-resource retry-count 5
service pm sys-restart
meshpoint-device ShougangMine
root
monitor critical-resource action no-root
monitor primary-port-link action no-root
path-method uniform
hysteresis period 60
exclude wired-peer mint-level-1
acs priority-meshpoint 5GHz ShougangMine
acs priority-meshpoint 2.4GHz ShougangMine
!
rf-domain ShougangMine
location Marcona
country-code ru
use smart-rf-policy SmartRF
channel-list dynamic
channel-list 5GHz 136
channel-list 2.4GHz 13
override-wlan CosapiWiFI ssid CosapiWiFi
controller-managed
!
rf-domain default
no country-code
!
ap7562 94-9B-2C-2A-BA-64
use profile AP7562-Root
use rf-domain ShougangMine
hostname VMM1-2ABA64
adoption-site ShougangMine
!
!
end
Yes, I have console access to AP's
