Rfs4000 APs with State Off

[bnorment55]

Hi,

I have a RFS4000 controller with Wing 5.9. I have 7 ap460. 4 of them have State set to ON, but 3 have state set to OFF. The APs are setup and show Active in Wing, but when I run show wireless radio, State if OFF.

Any ideas?

Thank you

[bnorment55]

Hi,

They are all running US, same profiles. When I go to Event History, it states Radio XXXX changing state from “Initializing” to “Off” (no wlans/mashpoints mapped)”. But when I go into WINGs, they all have the same profiles and wlans are mapped to the APs.

[Tuan_Nguyen1]

Try to check the APs have the same code. For example, some US codes cannot be used with WR codes

[bnorment55]

Yes All APs have the same firmware

[Tuan_Nguyen1]

Hi you

Try to check if all APs use the same Firmware?