cancel
Showing results for 
Search instead for 
Did you mean: 

Sending the AP name in beacons

Sending the AP name in beacons

James_A
Valued Contributor
I came across a page detailing how to get APs to broadcast their name, which is very handy while surveying with Ekahau, and the AirCheck G2 v3 firmware added support for it too. For ExtremeWireless the AP name is only included when the AP LEDs are set to Identify, I've raised a feature request to be able to have on all the time since I found it very useful and having the LEDs flashing all the time is a bit distracting. There's also a command to do it on WiNG, ap-attributes-information include-hostname.

Here's a Wireshark capture of a beacon from an AP3825 called M8ac:



Anyway it's a handy feature I hadn't run across before that I thought people might find interesting.
3 REPLIES 3

StephanH
Valued Contributor III
Hello,

there is a KB article how to enable the AP name transmit.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-have-an-Access-Point-Name-show-up-i...

Regards
Stephan

Regards Stephan

StephanH
Valued Contributor III
Oops, I didn't see the blue color in you text.

Regards
Stephan

Regards Stephan

James_A
Valued Contributor
Yeah, I linked it in my post. I'd never seen any mention of it before though, in the release notes or documentation.
GTM-P2G8KFN