VX9000 / 802.1x/EAP authentication with OpenLDAP and Samba linux domain.

[CRS]

Hi guys,

      I’m doing a new installation with VX9000. 

      I need to authenticate users by 802.1X/EAP

      The enviorement use Linux SAMBA domain and OpenLDAP server.

      I can’t found any documentations about this deploy. Can anyone share information with me?

      Samba domain server: 172.30.0.85

      OpenLDAP server:  172.30.0.240

      How would be the configuration in this scenario?

Regards,

Claudio Rezende

[CRS]

Hi Tomasz, 

    Thank you for your reply. 

    The authentication worked. Pointing the config to LDAP Server and configure ldap agent a user from Samba domain.  The strange is that the status of “Ldap Agent status” is “not joined to domain.” Even that the autentication it is working

Regards,

[Tomasz]

Hi Claudio,

If you wish to use WiNG to reach LDAP, I’d recommend to run internal RADIUS server on WiNG (APs or controller) and refer to LDAP as a user repository. I have some old doc but might be helpful for this: https://1drv.ms/b/s!AvxWpCsRBHSfgxhFLHrxaQhVhloS?e=BYMxLP

Do you prefer to work in GUI or CLI? In case of any more questions, let us know.

Hope that helps,

Tomasz

[SpirytoPL]

Hello, can you share doc once again? Seems to link doesnt work