VX9000 cluster licensing

[Shubha_m13]

We have 2 appliance license of VX9000 controller and 96 adaptive AP license.

We have 50 nos AP-8432  and we want to implement VX9000 in HA mode. Please share the document for implementing VX9000 in HA mode.  Also do we need to register this 50 AP on both the controller?

[ckelly]

Shubha_m13,

I’ve attached a copy of the guide here.

Suu, yes...if you have two VX9000’s, and you cluster them, you will have 128 AP licenses that are shared in the cluster.

[Suu_Nguyen]

My dear

We use 2 VX 9000  to implement HA mode. The licenses that exist by default on each VX9K (64 AAP licenses). So we have 2 VX 9000 can control 128 AP in HA mode?

Please support!

[Shubha_m13]

Hi Chris, In above comment there is no link. Please provide the same.

[ckelly]

You can find the document for setting up the VX9K HA cluster Here.

The licenses that exist by default on each VX9K (64 AAP licenses) are combined by the cluster.  Any additional licenses you purchase only need to be applied to one of the controllers.  The cluster will then share those licenses as well within the cluster.