VX9000 vs AP7602 config status: version-mismatch
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
02-11-2022 01:58 AM
Hi !
I have a VX900 with 7.7.0.0 firmware version, and 120 AP7602 with 5.9.1.11 firmware versión ( the latest one).
Tha AP can´t take any reconfiguration, every time i make a change or reconfiguration, the AP don´t do nothing.
In the controller "interface", "system", "adopted devices" i get in the "config status" column the message: version-mismatch
Thanks in advance
Eduardo M
I have a VX900 with 7.7.0.0 firmware version, and 120 AP7602 with 5.9.1.11 firmware versión ( the latest one).
Tha AP can´t take any reconfiguration, every time i make a change or reconfiguration, the AP don´t do nothing.
In the controller "interface", "system", "adopted devices" i get in the "config status" column the message: version-mismatch
Thanks in advance
Eduardo M
4 REPLIES 4
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
02-15-2022 03:05 AM
relaxed adoption is supported from 5.9.1
for wing 5 aps i would take the last possible 5.9
for wing 7 aps i would take the last 7.7
for wing 5 aps i would take the last possible 5.9
for wing 7 aps i would take the last 7.7
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
02-14-2022 11:44 AM
Thansk both !
Yes, I we have 2 diffferent AP´s,
The last WiNG was a 5.8 version, and we try to upgrade to recognice and adopt the 7602, but we lost the configuration changes.
Which version do you recommend to operate acceptable with both AP´s?
Tks.
Eduardo
Yes, I we have 2 diffferent AP´s,
- AP7602 177 UNITS
- AP310 76 UNITS
The last WiNG was a 5.8 version, and we try to upgrade to recognice and adopt the 7602, but we lost the configuration changes.
Which version do you recommend to operate acceptable with both AP´s?
Tks.
Eduardo
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
02-14-2022 05:32 AM
hi eduardo
as already said, ap7602 is not supported in v7.
but there is a way to still use them > its called "relaxed adoption"
with this you are still able to adopt wing 5 aps to a wing 7 controller.
therefore you need to disable the version check on the controller side (at best in the profile)
command:
enforce-version adoption none
>> BUT BE AWARE
1. it is not allowed to put wing 5 and wing 7 aps into the same rf-domain > each version needs to have its on
2. i´m not sure if it is still supported by extreme
nr
richard
as already said, ap7602 is not supported in v7.
but there is a way to still use them > its called "relaxed adoption"
with this you are still able to adopt wing 5 aps to a wing 7 controller.
therefore you need to disable the version check on the controller side (at best in the profile)
command:
enforce-version adoption none
>> BUT BE AWARE
1. it is not allowed to put wing 5 and wing 7 aps into the same rf-domain > each version needs to have its on
2. i´m not sure if it is still supported by extreme
nr
richard
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
02-14-2022 03:10 AM
Your controller and APs are running different firmware, that's why you are unable to manage them.
AP7602 is not supported on WiNG 7 so you would have to downgrade the VX9000 to WiNG 5.
Are there any other APs adopted to the VX9000?
Surprisingly the AP7612 is supported on WiNG 7 but the AP7602 isn't eventhough they seem to be very similar devices.
AP7602 is not supported on WiNG 7 so you would have to downgrade the VX9000 to WiNG 5.
Are there any other APs adopted to the VX9000?
Surprisingly the AP7612 is supported on WiNG 7 but the AP7602 isn't eventhough they seem to be very similar devices.
