WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

[William_FEO]

Hello everyone,

I recently purchase a VX9000 controller, 2 AP8432 access points and a VX9000 Appliance Licence.

I configure some task on the controller :

• Profiles (VX9000 & AP8432)
• Auto-Provisionning (adopt any ap8432)
• RF Domain (VX-Domain & User-Domain)

When I switch on the AP8432 and I connect on to it with SSH, I write the following command :

self
controller ip X.X.X.X level 2
commit write mem

If I check the AP log, I get the following error :

2018-10-29 11:16:57:Adoption state change: 'Waiting for cfgd OK' to 'Adoption failed': rejected due to adoption license

Could someone help me to solve this problem because we cannot use the VX controller.

Regards,

[Christopher_Fra]

For layer-3 adoption, the correct CLI syntax is:

controller host xxx.xxx.xxx.xxx level 2 [enter] (x represents controller IP for adoption)

[William_FEO]

Hi Wei,

You were right, I haven't activate the Appliance Licence. Now it's working

Thank's a lot.

[Wei_Liang_Loh]

You're welcome.

[Wei_Liang_Loh]

Hi William,
Did you activated your Appliance License and applied on your VX?

If not you can refer to link below on how to activate your VX appliance license
https://extreme-networks--c.na29.visual.force.com/apex/KCSInternal?srKp=ka1&id=kA134000000GwRx&a...

And apply in your controller.