05-15-2020 11:40 AM
Hi Folks,
Did someone get a chance to configure the PPPOE on WING AP, terminating the local broadband on the WING devices with PPPOE configuration, i get the below error in the AP CLI.
May 15 17:09:43 2020: %DAEMON-3-ERR: pppoe[2232]: Timeout waiting for PADO packets
May 15 17:10:23 2020: %DAEMON-3-ERR: pppoe[2244]: Timeout waiting for PADO packets
May 15 17:11:03 2020: %DAEMON-3-ERR: pppoe[2256]: Timeout waiting for PADO packets
May 15 17:11:43 2020: %DAEMON-3-ERR: pppoe[2264]: Timeout waiting for PADO packets
May 15 17:12:24 2020: %DAEMON-3-ERR: pppoe[2272]: Timeout waiting for PADO packets
Below is the configuration from the AP, is there anything wrong configuration here in it.
!
! Configuration of AP8533 version 7.3.1.1-012R
!
!
version 2.7
!
!
client-identity-group default
load default-fingerprints
!
ip access-list BROADCAST-MULTICAST-CONTROL
permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"
permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit DHCP replies"
deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-description "deny windows netbios"
deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"
deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP local broadcast"
permit ip any any rule-precedence 100 rule-description "permit all IP traffic"
!
mac access-list PERMIT-ARP-AND-IPv4
permit any any type ip rule-precedence 10 rule-description "permit all IPv4 traffic"
permit any any type arp rule-precedence 20 rule-description "permit all ARP traffic"
!
ip snmp-access-list default
permit any
!
firewall-policy default
no ip dos tcp-sequence-past-window
no stateful-packet-inspection-l2
ip tcp adjust-mss 1400
!
!
mint-policy global-default
!
meshpoint-qos-policy default
!
wlan-qos-policy default
qos trust dscp
qos trust wmm
!
radio-qos-policy default
!
wlan NK
ssid NK
vlan 1
bridging-mode local
encryption-type tkip-ccmp
authentication-type none
no multi-band-operation
no protected-mgmt-frames
wpa-wpa2 psk 0 9880282139
!
dhcp-server-policy BBNL
dhcp-pool BBNL
network 192.168.1.0/24
address range 192.168.1.100 192.168.1.200
default-router 192.168.1.1
dns-server 8.8.8.8 4.2.2.2
!
!
management-policy default
telnet
no http server
https server
rest-server
ssh
user admin password 1 334cf4e4da0b1317f0eb24f7ea873bc2a73f56dc5446afa9de3a4a87ee5638be role superuser access all
snmp-server community 0 private rw
snmp-server community 0 public ro
snmp-server user snmptrap v3 encrypted des auth md5 0 admin123
snmp-server user snmpmanager v3 encrypted des auth md5 0 admin123
!
nsight-policy default
!
profile ap8533 default-ap8533
autoinstall configuration
autoinstall firmware
crypto ikev1 policy ikev1-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ikev2 policy ikev2-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
crypto ikev1 remote-vpn
crypto ikev2 remote-vpn
crypto auto-ipsec-secure
crypto load-management
crypto remote-vpn-client
interface radio1
wlan NK bss 1 primary
interface radio2
wlan NK bss 1 primary
interface radio3
interface bluetooth1
shutdown
mode bt-sensor
interface ge1
interface ge2
interface vlan1
ip address dhcp
ip address zeroconf secondary
ip dhcp client request options all
interface pppoe1
keepalive
username 106c1295
password 0 12345678
service-name BBNL
no shutdown
ip nat inside
ip default-gateway priority 1
use dhcp-server-policy BBNL
use firewall-policy default
use client-identity-group default
logging on
service pm sys-restart
router ospf
adoption-mode controller
!
rf-domain default
timezone Asia/Calcutta
country-code in
ad-wips-wireless-mitigation disable
ad-wips-wired-mitigation disable
use nsight-policy default
channel-list dynamic
!
ap8533 74-67-F7-5C-45-69
use profile default-ap8533
use rf-domain default
hostname ap8533-5C4569
interface vlan1
ip address 192.168.1.1/24
no shutdown
no adoption-mode
!
!
end