cancel
Showing results for 
Search instead for 
Did you mean: 

Wing CLI question

Wing CLI question

Jacob_Airov
New Contributor III
We want to clear a bunch of overrides on a bunch of APs and their radios that was set. Is there a way to mass-clear overrides to prevent of from touching the config of each one individually?

We're using Wing 5.8 on a vx9000 controller.

Thanks for all the help lately guys!!
6 REPLIES 6

Timo1
New Contributor II
You can remove the overwrite via CLI:

vx9000-9CEAAA(config)#ap7522 84-24-8D-1A-AA-AA
vx9000-9CEAAA(config-device-84-24-8D-1A-AA-AA)#remove-override interface radio 1

This remove all settings for radio 1 on AP level.

Bin
Extreme Employee
Hello Jacob,

This picture shows you how the device final configuration comes.
Changes on configuration made to devices (APs) are only applied to those devices.



Best regards,

Jacob_Airov
New Contributor III
Bummer, ok well thanks

aholden
Extreme Employee
This matches #2. You will need t go into each of the APs that are adopted to the Controller and change their profile on the Controller
GTM-P2G8KFN