Wing CLI question

[Jacob_Airov]

We want to clear a bunch of overrides on a bunch of APs and their radios that was set. Is there a way to mass-clear overrides to prevent of from touching the config of each one individually?

We're using Wing 5.8 on a vx9000 controller.

Thanks for all the help lately guys!!

[Timo1]

You can remove the overwrite via CLI:

vx9000-9CEAAA(config)#ap7522 84-24-8D-1A-AA-AA
vx9000-9CEAAA(config-device-84-24-8D-1A-AA-AA)#remove-override interface radio 1

This remove all settings for radio 1 on AP level.

[Bin]

Hello Jacob,

This picture shows you how the device final configuration comes.
Changes on configuration made to devices (APs) are only applied to those devices.

Best regards,

[Jacob_Airov]

Bummer, ok well thanks

[aholden]

This matches #2. You will need t go into each of the APs that are adopted to the Controller and change their profile on the Controller