FAQs - Page 107 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

How are S-Series I/O features (Access vs Core) determined?

Article ID: 12036 In order for a chassis to have S150 (Core) features, all S-Series I/O modules must be of the S150 class (12341). As soon as a S130 class module is inserted, the entire chassis will revert to Access-level features. Any existing S15...

SecureStack Version information is Missing after Firmware Upgrade

Article ID: 12891 Products SecureStack C3, C2, B3, B2, A2 Changes Upgraded firmware (5605), then rebooted onto it. Issued the 'show version' command. Symptoms The device no longer displays values for the Serial number, Hw, Bp, and BuFW fields. ...

Predicted SecureStack Disruption Timing when Replacing an Operational Manager Unit

Article ID: 12133 Products SecureStack C3, C2, B3, B2, A2 Discussion In article 7086, the "Stack Disruption timing" as refers to the manager unit discusses only what happens when the manager unit's role is swapped to a different device within the...

SecureStack C2 Unit changed position in a Stack

Article ID: 7247 Products Matrix C2 SecureStack C2 Symptoms Stack unit changed position in stack. SecureStack switch lost stack unit number. Securestack switch lost port configurations. 'show switch' Solution Upgrade to firmware 3.01.94 or high...

Renumbering a SecureStack Manager Unit Results in Configuration Loss

Article ID: 10749 Products SecureStack C3, C2, B3, B2, A2 Changes Renumbered a switch unit which is serving as the stack's Mgmt Switch. Symptoms Upon execution of the renumber operation, the stack lost its user configurations. Cause If the cu...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN