FAQs - Page 109 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

How to Clear a SecureStack Configuration to Factory Defaults

Article ID: 5628 Products SecureStack C3 SecureStack C2 SecureStack B3 SecureStack B2 SecureStack A2 Goals Clear NVRAM Clear to factory defaults Solution This information is paraphrased from the SecureStack C2 Configuration Guide. One of two ...

Clearing the Host IP Address on the SecureStack family

Article ID: 5692 Products SecureStack C2 SecureStack B2 SecureStack A2 Commands 'set ip address' 'clear ip address' Symptoms "Subnet mask must have contiguous ones and be no longer than 30 bits." "The IP address and subnet mask combination is n...

IP Helper support on the SecureStack/G-Series

Article ID: 5720 Products SecureStack C3, C2, B3 G-Series Goals Sample configuration Symptoms 'ip helper-address' Solution One global IP Helper, configurable as in the following example, is supported with C2 firmware through 3.03.38: C2(su)-...

Use of the IP Forward-Protocol commands on the SecureStack/G-Series

Article ID: 11980 Products SecureStack C3, firmware 1.02.01.0004 and higher SecureStack C2, firmware 5.02.01.0006 and higher SecureStack B3, firmware 1.02.01.0004 and higher G-Series, firmware 1.02.00.0043 and higher Solution By default, UDP forw...

IdentiFi Controller f/w 8.21.05.0005 detects Local Authorized APs/BSSIDs as Spoofed

Article ID: 15064 Products C20, C25, C4110, C5110, C5210, V2110; firmware 8.21.05.0005, 8.21.06.0006 IdentiFi (formerly Enterasys, HiPath) Wireless Controller Symptoms Some known BSSIDs are marked as Spoofed, Internal Honeypot, or Rogue. In some ...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN