FAQs - Page 110 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

Using NetSight to setup traps and informs on devices

Article ID: 9923 Products NetSight NetSight Console Goals Setup traps and inform messages using NetSight Console. Solution These first 3 steps are required for snmpv1/v2c traps. SNMPv3 traps and Informs will require additional setup and will b...

Using NetSight to setup syslog on devices

Article ID: 9924 Products NetSight NetSight Console Goals Use NetSight to configure syslog receivers on devices. Solution 1. Right click on the device from the Device Tree and select Syslog Receiver Configuration menu pick. 2. In the upper...

SecureStack/G/D-Series cannot Enter/Load Account Password if it Begins with an Exclamation Point

Article ID: 12380 Products SecureStack C3, C2, B3, B2, A2; all firmware G-Series, all firmware D-Series, all firmware Changes Changed the login password for a user account using the 'set password newuser' command, which then prompts the user for th...

What is a Jumbo Frame and what Enterasys products support them

Article ID: 1184 Goals Jumbo Frame Support Symptoms Jumbo Frames Oversize frames Cause A Jumbo Frame is an ethernet frame containing a data field larger than the maximum 1500 bytes specified by the IEEE 802.3 Ethernet standard. A 1500-byte data...

DFE Jumbo Frame Functionality Overview

Article ID: 12390 Products Matrix N-Series DFE Goals General description of how jumbo ethernet frame processing works. Solution Here is the way that jumbo frame (1184) processing operates, on the DFE: Jumbo frame enablement at the port level ('...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN