FAQs - Page 112 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

SecureStack Configuration File manipulation

Article ID: 5623 Products SecureStack C3 SecureStack C2 SecureStack B3 SecureStack B2 SecureStack A2 Goals Save router configuration Save the configuration Upload configuration Download configuration Solution When in switching mode (default) or...

S/N/K-Series use of the 'ip multicast-arp-learning' command

Article ID: 14129 Products S-Series, firmware 7.31.03.0010 and higher Matrix N-Series DFE, firmware 7.31.03.0010 and higher K-Series, all firmware Goals Use of the 'ip multicast-arp-learning' command. Solution The Configuration/CLI Guides provi...

Unable to set a Static Multicast ARP on the SecureStack router

Article ID: 12596 Products SecureStack C3, SecureStack C2 SecureStack B3 Changes Trying to configure a static multicast ARP (i.e. 'arp <IP_address> <MAC_address>') on the router. One reason is to use virtual MAC address 03bf-c0xx-xx-xx for Micro...

About 'Static Multicast Configuration' on the N/S-Series

Article ID: 9287 Products Matrix N-Series DFE, firmware 5.21.24 and higher S-Series, all firmware Protocols/Features Load balancing Related to Microsoft NLB Commands 'set mac multicast' Goals Static scoping of Multicast streams Static Multi...

D-Series Dropping Telnet Sessions

Article ID: 11405 Products D-Series, firmware 1.00.04.0001 and lower Changes Established a Telnet session to the switch host. Symptoms The Telnet session drops, possibly while the user is typing into the CLI. The Telnet session worked for awhi...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN