FAQs - Page 36 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

Applying Advanced Router licensing to the 7100-Series

Article ID: 16096 Products 7100-Series 71A-EOS-ADVL3, 71A-EOS-G-ADVL3 Symptoms Advanced router license cannot be applied. "code:Error: Unknown: "<long string ending with ==>code:"" "code:Error: This license key is per chassis and requires the "cha...

Filtering Egress Traffic based on Frame Characteristics

Article ID: 5888 Products DFE Protocols/Features Policy SVL UPN Cause It may sometimes be desired to filter certain traffic upon egress, based on frame characteristics such as MAC Address, IP Address, TCP/UDP Destination Port, etc. This traffic w...

G/C/B-Series 'show' command results in "Output will be truncated" errors

Article ID: 13747 Products G3-Series, firmware 6.42.05.0001 and lower C5-Series, firmware 6.42.05.0001 and lower C3-Series, firmware 6.42.05.0001 and lower C2-Series, firmware 5.02.12.0006 and lower B5-Series, firmware 6.42.05.0001 and lower B3-Ser...

Expectations for Setting and Clearing SNMP Commands on Enterasys Switching products

Article ID: 10308 Products SecureStack C3, C2, B3, B2, A2 D-Series G-Series I-Series Symptoms 'code:clear snmp...' command is present after clearing a 'code:set snmp...' command. 'code:set snmp...' command is present after overriding or removin...

How to Reverse a CLI-based Command

Article ID: 5542 Products DFE Matrix C1 Matrix E1 SecureStack C3 SecureStack C2 SecureStack B3 SecureStack B2 SecureStack A2 Related to Command line interface CLI management Goals Reverse / negate / clear / back out a CLI command Navigate the C...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN