FAQs - Page 38 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

S-Series DHCP Server configuration for Multiple Interfaces

Article ID: 13918 Products S-Series Goals Run a Dynamic Host Configuration Protocol (DHCP) Server on multiple routed interfaces. Solution In addition to providing its DHCP clients a dynamic IP address within the proper subnet, this sample confi...

Purpose of the 'cos flood-ctrl' command set

Article ID: 16074 Products 7100-Series S-Series Matrix N-Series DFE K-Series I-Series G-Series D-Series C5, C3, C2-Series B5, B3, B2-Series A4-Series Changes Implemented the 'code:cos ... flood-ctrl' command set - this does not require licensing ...

DFE Reboots after 497 Days of Uptime, with f/w prior to 5.42.06

Article ID: 10911 Products Matrix N-Series DFE; firmware 5.42.04 and lower Symptoms Module resets. Watchdog "code:client 26" and/or "code:client 37" error message in the Fault Log (5101); for example: <code:1>code:DistServ[1.tDsBrdOk]serverWatchD...

DFE Reboots after 497 Days of Uptime, with f/w prior to 5.12.02

Article ID: 5719 Products DFE Firmware 5.11.29 and lower Firmware 5.01.67 and lower Changes 497 days uptime Symptoms Reboot Error message "pTimerTask previous stamp current stamp" Cause DFE firmware prior to version 5.12.02 (5.11.29 and lower...

G-Series Log is Full of "cmgrCardInsertRemoveTask" Messages and not Logging New Messages

Article ID: 10931 Products G-Series Symptoms Upon product purchase, the code:current.log is full of messages logged against firmware code:01.00.00.0013T. The messages are all iterations similar to: <code:57> code:OCT 29 18:09:21 2007 BOOT[26...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN