FAQs - Page 90 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

About SNMP Traps, Informs, and Notifications

Article ID: 5721 Protocols/Features Trap Inform Notification SNMPv3 Goals Difference between a Trap and an Inform Solution A Trap, applicable to SNMPv1/2/3, is an unacknowledgeable communication of some condition. An Inform, applicable to SNMP...

N-Series OSPF Traps Stop Working after 7.x firmware upgrade

Article ID: 14481 Products Matrix N-Series DFE, firmware 7.11.01.0025 and higher Changes With pre-7.x firmware; configured OSPF (5058), and configured to send SNMP traps (5390) which include OSPF traps. Then, upgraded to the 7.x firmware line (13...

C5/B5-Series LACP default settings

Article ID: 13381 Products C5-Series, all firmware B5-Series, all firmware Symptoms Does not automatically form a dynamic Link Aggregation (LAG) upon ethernet cable attachment. Cause Link Aggregation Control Protocol (LACP) is not enabled by de...

Configuring a Static / Dynamic LAG on a SecureStack

Article ID: 5531 Products SecureStack C3, B3, B2, A2; all firmware SecureStack C2, firmware 2.00.48 and higher C5-Series, B5-Series, A4-Series; all firmware Protocols/Features Link Aggregation Static LAG Dynamic LAG LACP Standards 802.3ad Goa...

Sample OSPF Configuration on N-Series

Article ID: 5058 Products Matrix N-Series X-Pedition Protocols/Features OSPF Goals Sample configuration Solution The following sample shows a fully formed adjacency between two ospf routers (DFE and X-Pedition) using a modified OSPF priority ...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN