FAQs - Page 89 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

Using the 'mask' Parameter in an SNMP View

Article ID: 5618 Products DFE SecureStack C3 SecureStack C2 SecureStack B3 SecureStack B2 SecureStack A2 Protocols/Features SNMP Commands 'set snmp view' Goals Sample configuration Solution The mask parameter ties to RFC2575, "View-based Ac...

Using the 'set snmp view' command to Define an SNMP View

Article ID: 5610 Products DFE SecureStack C3 SecureStack C2 SecureStack B3 SecureStack B2 SecureStack A2 Protocols/Features SNMP Commands 'set snmp view' Goals Sample configuration Cause This solution provides clarifications for SNMP View c...

Setup traps on the N-Series

Article ID: 5116 Products N-Series DFE Protocols/Features SNMP Traps Solution The following example will describe how to setup SNMPv1 traps on the N-series products. The first thing that needs to be defined is a community name that will be used w...

Setting up SNMPv3 Access on the N-Series

Article ID: 5086 Products Matrix N-Series DFE Protocols/Features SNMP SNMPv3 Goals Configure for SNMPv3 Sample configuration Solution The default SNMP configuration for the DFE includes a single community name - "public" - which grants read-w...

Configure a DFE for SNMPv1

Article ID: 5245 Products DFE Goals Sample configuration Solution The default SNMP configuration for the DFE includes a single community name - "public" - which grants read-write access to the whole MIB tree for both SNMPv1 and SNMPv2c. See 51...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN