Article ID: 16031
Products
D-Series, firmware 6.03.09.0005 through 6.03.11.0004
C5-Series, firmware 6.42.01.0046 through 6.61.07.0010
C3-Series, firmware 6.42.01.0046 through 6.61.07.0010
B5-Series, firmware 6.42.01.0046 through 6.61.07.0010
B3-Series, firmware 6.42.01.0046 through 6.61.07.0010
Changes
Configured authentication to use the vlan-tunnel attributes in the RADIUS reply to assign a VLAN to the authenticating user.
That is, using '
code:set policy maptable response tunnel
' or '
code:set policy maptable response both
'.
Symptoms
Upon authentication, the VLAN assignment does not take place.
The error log contains message "
code:TunnelPrivateGroupId0 length is greater than 4!
"
Cause
The server is inappropriately padding the VLAN ID with a NULL character, which for VLAN values greater than 999 will cause the length of the ID to exceed the defined spec maximum.
Solution
For the D-Series, upgrade to firmware 6.03.12.0006 or higher.
For the C5, C3, B5, or B3-Series, upgrade to firmware 6.61.08.0004 or higher.
