Article ID: 14274
Products
K-series, firmware 8.02.01.0012 and lower
Symptoms
Hardware interrupt message "Received Interrupt PETRA_QDR_ECC" appears on local console and in syslog ('show support'), but not in the debug messageLog ('show support').
For example:10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 1, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 2, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 3, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 4, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 5, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 6, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 7, value= 0x1#015Cause
The message reports a false error condition.
Solution/Workaround
Upgrade to firmware 8.11.03.0005 or higher, which suppresses these harmless messages.
Pre-upgrade workaround: Ignore the message(s). There is no negative impact.
