This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Extreme Networks
- Search
Search
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
646 results
Sorted by:
by
Stephanos
in ExtremeSwitching (EXOS/Switch Engine)
03-20-2015
03:01 PM
03-20-2015
03:01 PM
One switch in particular isn't allowing ssh connections, it doesn't show anything on switch logs, SSH is enabled with no access profiles, the private key is present and the switch configuration is th...
by
djs86
in ExtremeSwitching (EXOS/Switch Engine)
05-23-2025
05:03 AM
05-23-2025
05:03 AM
Hello, We run Free TACACS server and would like to know if anyone has some example config to allow full access? The TACACS is for access to an EXOS switch. Many thanks
by
marconet_22
in ExtremeSwitching (EXOS/Switch Engine)
06-03-2025
07:00 AM
06-03-2025
07:00 AM
Hi I need to connect an Extreme switch x590 to an optical interface type LC 10Gb via breackout cable one side QSFP+ and other side with n°4 Duplex LC 10 Gb optical connector. Something like this: ...
a month ago
Hi, I have problem with port sharing. As in manual im typing enable sharing 47 grouping 47-48 lacp -> on 2 switches x440 and after that im getting on both switches som...
by
coadmin
in ExtremeSwitching (EXOS/Switch Engine)
05-21-2025
07:46 AM
05-21-2025
07:46 AM
We are very new to Extreme. Coming from HP/Aruba. We have a production VLAN 1 that is used. Can we use the Default Vlan 1 on the EXOS Extreme switches just like any other VLAN?
by
Ahmed_101
in ExtremeSwitching (EXOS/Switch Engine)
05-14-2025
09:50 AM
05-14-2025
09:50 AM
Hi all, a customer have exos switch and fortinac, we are trying to do the snmp configs in exos so it can communicate with fortinac but we alwase get error says that the snmp configs is wrong in fort...
by
khosro1982
in ExtremeSwitching (EXOS/Switch Engine)
05-04-2025
07:29 AM
05-04-2025
07:29 AM
I have a Summit X440-24P switch, recently when i turn it off and turn it on tomorrow it boots up to factory default despite the fact i have primary.cfg configured as my active configuration and image...
by
Keith9
in ExtremeSwitching (EXOS/Switch Engine)
05-01-2025
06:33 AM
05-01-2025
06:33 AM
We have two x690 stacks at our core that were running an old version 22.1. We upgraded to 22.6.1.4 and then 32.7.2.19 patch1-32. Everythings working fine but theres these new logspam entries...
05-09-2016
04:50 AM
All these below switch models make very loud fan noise. what is the solution to reduce the noise?
Summit X440-48t
Summit X440-48t
Summi...
by
PhilDyer
in ExtremeSwitching (EXOS/Switch Engine)
07-24-2023
09:23 AM
07-24-2023
09:23 AM
Hi, does anyone have any experience with reauthentication commands issued from Forescout appliances? I've confirmed that the Forescout appliances are sending the reauthenticate command with ...
