We have some ubuntu VMs on prem for Extreme Management Center and Analytics and the version is 8.5.7.28. They work fine but they come up as older software according to Crowdstrike Falcon Protec...
on our switches I want to configure authentication and accounting servers. when I configure the Authentication Management Interface, I can select VR-Default of VR-Mgmt. But on a several ...
Upgrade system to version 8.5.7.28 after that I cannot find file "myDeviceTypes.properties" is it remove in this version? In addition, are this the only way to make an unknown device known? Netw...
Hi all Inherited a network where Netsight is on version 6.2.0.211 What's the latest version and upgrade path? Network is a mixture of Summit X440 and X440-G2s.. Thanks!
When TACACS is enabled I cannot login with local account. When I disable TACACS, local login is OK. I cannot seem to find the command which would configure order of authentication, or allow both opti...
We're (at least I am) thoroughly confused right now. We required an ari-gapped version of netsight and then of EMC and now asked for a similar version of XIQ. We first received an offer for XIQ-PIL-V...
setting up a network with three AP's one AP7532 and two AP7522, I have the AP7532 setup as the virtual controller but am unable to get the two AP7522's to provide connectivity
Hi I see this error almost on a daily basis however Ubuntu says I have approximately 30GB Free. Could some body Please point me in the right direction ? InnerException Message: The transacti...
Hi Having trouble archiving the XCC controllers in XMC I get failed / Error when trying to do this. I do have the XCC manually backing upto a store on the XMC but it would be good if I could archive ...
็Hello The hardware... VDX8770 X460-G2 X440-G2 WiNG VX9000 Controller AP505i The question is how can I manage these models with a single system on-prem? The condistion fo...