- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-16-2025 03:19 AM - edited ‎05-16-2025 03:29 AM
I am trying to configure Extreme Networks switches (X440-G2-12T-10GE4 stack) for centralised authentication for remote login (SSH) using a ClearPass RADIUS setup.
I’ve attempted the configuration, but the CLI session returned is not in privileged mode, and I’m unable to navigate to privilege or configuration modes from the authenticated cli session.
I suspect the issue may be related to the ClearPass parameters used in the enforcement profile, enforcement policy, or service configuration.
Could you please confirm the correct parameters required to successfully complete this setup?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-16-2025 05:37 AM
I believe all you need is Service-Type=6. Please see https://extreme-networks.my.site.com/ExtrArticleDetail?an=000074221.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-16-2025 05:37 AM
I believe all you need is Service-Type=6. Please see https://extreme-networks.my.site.com/ExtrArticleDetail?an=000074221.
