setting up a network with three AP's one AP7532 and two AP7522, I have the AP7532 setup as the virtual controller but am unable to get the two AP7522's to provide connectivity
Go to Solution.
View solution in original post
I have powered off all except the three AP’s
I have powered off the NX5500E will that not help?
Without any special change in controller’s configuration, that’s the reason. APs get to the controller and don’t care about VC. You can try to put VC + other APs into another VLAN on the wired side for instance.
Hope that helps,
am I having issues because I have a NX5500E on the network running at the same time