How to export the cfg file from x450-e to an x460 g2 switch

[Wayne1]

How to export the cfg file from x450-e to an x460 g2 switch

[EtherMAN]

Could be some other things that are handled a bit different to such as acl's or policy's.. Drew is correct as safest bet would be to past old to new 5 or 6 lines at a time checking for errors... If your port numbers don't match up you just have to compare how they are configured and change the config accordingly.

[Wayne1]

so this will work going from a x450-e to the new 460 g2

[Drew_C]

You shouldn't have any trouble with this. I would recommend scrolling through the config and confirm your port numbers are correct. The X450e had "combo ports" whereas the X460-G2 does not. Port numbers for any XGM modules will not be the same for the VIMs on the X460-G2.

[StephenW]

Method 1 in this article is what Brandon is talking about.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-copy-a-configuration-to-a-new-switc...