cancel
Showing results for 
Search instead for 
Did you mean: 

Network Design Selection for a pair of BD8810 & SUMMIT X460 stack.

Network Design Selection for a pair of BD8810 & SUMMIT X460 stack.

Jitendra_Patel
New Contributor
I have a pair of BD8810 as CORE and Several stacks of SUMMIT X460 at floors of a multi-story building.

From each floor Stack two fiber uplinks are going to CORE Switches.

Please guide me which Protocol Should I use?

MLAG with VRRP, MLAG ESRP, VRRP-STP, EAPS-ESRP .

Application VoIP, Wifi controller & Data.

Please suggest me the Design for network.

6 REPLIES 6

Jitendra_Patel
New Contributor
OK.. Thanks . What about L3/Gateway redundancy? What should I use VRRP or ESRP?

Is there any application note for such setup?

andreas1
New Contributor II
Mlag for this setup. Great utilisation and you could dual Connecticut APs and clients IF needed.
GTM-P2G8KFN