Network Design Selection for a pair of BD8810 & SUMMIT X460 stack.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-17-2015 02:55 PM
I have a pair of BD8810 as CORE and Several stacks of SUMMIT X460 at floors of a multi-story building.
From each floor Stack two fiber uplinks are going to CORE Switches.
Please guide me which Protocol Should I use?
MLAG with VRRP, MLAG ESRP, VRRP-STP, EAPS-ESRP .
Application VoIP, Wifi controller & Data.
Please suggest me the Design for network.
From each floor Stack two fiber uplinks are going to CORE Switches.
Please guide me which Protocol Should I use?
MLAG with VRRP, MLAG ESRP, VRRP-STP, EAPS-ESRP .
Application VoIP, Wifi controller & Data.
Please suggest me the Design for network.
6 REPLIES 6
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-27-2016 03:59 PM
I've had this topology for some time and I'm read to secure east west traffic. I'm assuming I'll need to build a distribution layer. I'm having trouble finding network diagram examples. Please pass them along.
Thank you
Thank you
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-21-2015 01:12 AM
Hi Jitendra,
Can you please eloborate more on some VLANs are blocked at core? We need to make sure that all the VLANs are allowed in the ISC link (interconnecting CORE A and CORE .
Keep us updated.
Can you please eloborate more on some VLANs are blocked at core? We need to make sure that all the VLANs are allowed in the ISC link (interconnecting CORE A and CORE .
Keep us updated.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-20-2015 04:07 PM
Configured VRRP in CORE BDs and MLAG. Configured LACP between CORE and Access Stack.
But some VLANs are blocked at CORE.. PFA Topology. Please guide..
But some VLANs are blocked at CORE.. PFA Topology. Please guide..
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-18-2015 05:49 AM
I'd go for VRRP, and eventually in Active/Active. Protect the edge with ELRP, use LACP between the Core and the stacks. Eventually add ELRP as well on the Core, using 16.1 new capabilities, to help prevent further loop creation even on the Core. You may want to add alternate path protection with MLAG.