Hi all,
I would like to do a 802.1p marking on the ingress port on the switch, because the end node itself cannot mark 802.1p or DSCP value on its frame/packet.
How I can do this?
BR
Lu
Hi,
I are trying to understand from a layer two point of view does each virtual router have its own FDB database, taken in that we will not share any physical ports between the virtual routes.
In my case there will be three virtual routers, thus a ...
Some time ago i had problem starting Netsight because of java problem. Console fails loading cache. There was not easy thing to find where the cache was stored. [clearing java cache via java control panel was not effective].
Finally i found all thr...
How to integrate cisco switches with Extreme NAC. You can pass vlan, acl's per user, authenticate mac or user even download acl's from NAC and even more - multiauthenticate up to 8 users on one cisco port...
What's the use ETMON process?
is also porsible restart without having problem with the switch.
Switches stacks with this message Exos version 15.3.4.6 v1534b6-patch1-10
