Extreme Networks

I would like to understand if WAN-PHY is only supported on the Extreme X480 switches or what other Extreme switches?

Hi All, We have just replaced a few Cisco Switches with Extreme Switches, with the Cisco switches we could graph each vlan on the switch. I just would like to understand if this is possible with Extreme, we have configure ports x:xx monitor vlan yyy...

Hi, We have three switches in a stack, slot 1, slot 2 and slot 3. The time is the same on slot 1 and slot 3 if a telnet to slot 1 and slot 3 and show switch. But if I telnet to slot 2 and do a show switch the time is different and there is no time z...

Hi, Just would like to understand if you have an un-tagged vlan for example vlan default on your mlag ports on both switches will this create a loop."Yes vlan default is also on the ISC port between the switchs" Would this be like joying to access...

Hi, We would like to enable graphing for vlan traffic, we have over 3000 vlans on some switches. I just would like to know will this have any impact on the CPU on the switches. We are using X670-V, X460 and X440 within our network. Thanks Ian