Scripting - Page 18 - Extreme Networks

Scripting

Questions and discussions about scripting

Forum Posts

Sorted by:

Start a conversation

GRE keep-alive script

Does anyone have this kind of script or sample? This script is to check GRE tunnel up. For example, always ping the remote-end tunnel ip address. If it is not reachable, shut down local tunnel interface. As Extreme doesn’t have keepalive mechanism...

Check Serial Number Gbic Installed on S-series & A-series

I wanna check the serial number of my switches remotely. Which CLI command can use? I try with various OID and snmpwalk but none gave me the serial number of my Gbic installed. Help!

Conflict of switch IP address configuration

I have two Ethernet switches part of industrial network where they are connected in redundant arrangement so that multiple devices on the network are redundantly connected to both of the switches. By mistake while replacing one faulty switch of the...

speed problem

We are Using 20 wireless extreme AP-4521 also we configured virtual controller. Our all client pc are connecting only 65 mpbs speed. its possible to increase ....we are feel very slow

HI Friends need to allow 192.168.27.55 acl policey

This policy we need to allow IP:192.168.27.55 only.kindly Help as Policy: test entry Deny_53 { if match all { source-address 192.168.53.0/24 ; destination-address 192.168.26.0/24 ; } then { deny ; count Deny_53 ; } } entry Deny_27 {...

Top Kudoed Authors

User

Count

3

2

1

1

1

GTM-P2G8KFN