Scripting - Page 19 - Extreme Networks

Scripting

Questions and discussions about scripting

Forum Posts

Sorted by:

Start a conversation

HI Friends need to allow 192.168.27.55 acl policey

This policy we need to allow IP:192.168.27.55 only.kindly Help as Policy: test entry Deny_53 { if match all { source-address 192.168.53.0/24 ; destination-address 192.168.26.0/24 ; } then { deny ; count Deny_53 ; } } entry Deny_27 {...

i have more messages related to LACP , Add port 1 to aggregator

i have more messages related to LACP , i need to know what are those messages and are impact the sirvice 09/07/2014 08:56:04.17 Add port 1 to aggregator 09/07/2014 08:55:56.14 Add port 6 to aggregator 09/07/2014 08:55:54.58 Add por...

Dear all. I have problem C25 conect to external internet and APs 3710i not provide dhcp for client. Help me! Thanks all!

Dear all. I have problem C25 conect to external internet and APs 3710i not provide dhcp for client. i config follow: port esa0 ( ip 192.168.2.150 ), dhcp fix none and create topology S with ( Bridged Location at AP ) based port esa0 with ip 192.1...

Need help with security measurements. port security IP snooping, MAC Spoofing.

Hi everyone, We're getting ready to start the new school year and I've advised to lock down the network as much as I can and with that said I'm trying my best to my cisco knowledge onto these extreme network switches. 1. I tried enabling port secur...

Virtual Router (VR) and XOS API

Does the XOS API support VR (Virtual Router) specific data, like routing table and OSPF neighbours for a specific VR instance? Since this is not supported in SNMP I´m thinking about using the XOS API(XML).

Top Kudoed Authors

User

Count

3

2

1

1

1

GTM-P2G8KFN